Products Description

DAWSON MACHINERY & MOULD GROUP

This machine has three stations, injection preform, blowing & stretch and product release. The raw material comes from the hopper to the injection screw to inject preform; the plate rotates preforms to blow/stretch blow station with themselves heat, without any reheating for blowing,then the product will rotate to release station and drop down, It's fully automatically cycle rotation working mode,no need to buy bottle preform, no waste, high degree of automation, finished products smooth and beautiful.

Commonly used in 10-1000 ml PET cosmetic bottle, milk bottle, sports water bottle, pharmaceutical packaging, PC bottle, red wine cup and LED lampshade, etc

SCREW DIAMETER(mm)	50
SCREW L/D RATIO (L/D)	20.5:1
SCREW SPEED (R/MIN)	0-150
THEORETICAL INJECTION WEIGHT (G)	481
INJECTION PRESSURE (MPa)	176
MAX. HYDRAULIC PRESSURE (MPa)	140
ACTUAL INJECTION WEIGHT (G)	452
BLOW CLAMPING FORCE (KN)	150
CLAMP TONNAGE (KN)	800
WHEEL DIAMETER (MM)	1100
MAX HIGHT OF BOTTLE - without core (MM)	20-200
MAX HIGHT OF BOTTLE - with core (MM)	20-250
OPEN VERTICAL MOLD TRIP (MM)	530
MAX PUMP PRESSURE (MPa)	16
SERVO MOTOR (KW)	22
HEATING POWER (KW)	12.2
OIL TANK VOLUME (L)	450
DIMENSION OF MACHINE (M)	4.5X1.75X3.3
WEIGHT OF MACHINIE (TON)	8

Machine Advantages

1. The wheel rotation is driven by electrical servo motor, not hydraulic.

2. Full automatic controlling system, easy operating.

3. The temperature of material barrel and hot runner is controlled accurately by PIT.

4. More cost is saved than traditional machine.

5. Compact structure; less space needed.

6. Injection: Hot runner and temperature control device are standard configuration. Only change mold for making a new product;

Stretch Blow: Hydraulic mold clamping, core insert, stretch blow and bottom molding are standard configuration;

Product Release: Equipped with a standard ejector.

The Injection Stretch Blow Molding Machine process includes mould injection, stretch blowing and off-molding, all these steps could be finished in one step. The products from this machine don’t have flash, sprue, and with much less disfigurements. It presents the perfect looking mouth, bottom and seam as well as better transparency, higher rigidity. ISBM Injection Stretch Blow Molding Machine products are thinner, is possible to help you save 50% raw material. Besides the merit mentioned above, this machine can reach higher speed so as to achieve higher efficiency. ISBM1100N-3 is suitable for eye dropper bottles, medicine bottles, cosmetic bottles, jars, milk bottles, yogurt bottles, baby bottles...etc.

Company Profile

DAWSON MACHINERY & MOULD GROUP

Our customers are all around the world.

Vietnam, Australia, Indonesia, Malaysia, Thailand, Sri Lanka, Kazakhstan, Russia, UAE, Saudi Arabia, Malta, Romania, Italy, India, Syria, Ethiopia, Egypt, Sudan, Tunisia, Algeria, Kenya, Nigeria, South Africa, Zimbabwe, Mexico, Guatemala, Ecuador, Colombia, Venezuela, Peru....

We have our own service team in

Saudi Arabia, Colombia, Panama, South Africa ...

DAWSON MACHINERY & MOULD GROUP

Our customers are all around the world.

Vietnam, Australia, Indonesia, Malaysia, Thailand, Sri Lanka, Kazakhstan, Russia, UAE, Saudi Arabia, Malta, Romania, Italy, India, Syria, Ethiopia, Egypt, Sudan, Tunisia, Algeria, Kenya, Nigeria, South Africa, Zimbabwe, Mexico, Guatemala, Ecuador, Colombia, Venezuela, Peru....

We have our own service team in

Saudi Arabia, Colombia, Panama, South Africa ...