One step three stations plastic shampoo bottles Injection Blow Molding Machine
The process of injection blow molding (IBM) is used for the
production of hollow glass and plastic objects in large quantities.
In the IBM process, the polymer is injection molded onto a core
pin; then the core pin is rotated to a blow molding station to be
inflated and cooled. This is the least-used of the three blow
molding processes, and is typically used to make small medical and
single serve bottles. The process is divided into three steps:
injection, blowing and ejection; The product has no splicing, high strength at the bottom, uniform wall thickness
and high precision of mouth size; There is no corner scrap or
flash, and the seam line of the product can hardly be seen;
Injection blow molding machine suitable for making large quantities
of 5ml to 1000ml small plastic bottles, such as cosmetics, daily necessities,
medicine and food packaging bottles.
DAWSON MACHINERY & MOULD GROUP
Our customers are all around the world.
Vietnam, Australia, Indonesia, Malaysia, Thailand, Sri Lanka,
Kazakhstan, Russia, UAE, Saudi Arabia, Malta, Romania, Italy,
India, Syria, Ethiopia, Egypt, Sudan, Tunisia, Algeria, Kenya,
Nigeria, South Africa, Zimbabwe, Mexico, Guatemala, Ecuador, Colombia, Venezuela, Peru....
| Item | Unit | Data |
| Injection system | Screw Diameter | mm | 50 |
| Max. Theoretical injection capacity | G | 314 |
| Heating capacity | KW | 10 |
| No. of heating area | Qty | 3 |
| Clamping & blowing system | Clamping force of injection | kn | 650 |
| Clamping force of blowing | kn | 89 |
| Opening stroke of mold platen | mm | 140 |
| Max. Platen size (L×W) | mm | 740×390 |
| Min. Mold thickness (H) | mm | 280 |
| Heating capacity of mould | KW | 5.0 |
| Product dimension range | Suitable bottle range | ml | 5-800 |
| Max. bottle height | mm | ≤200 |
| Max. Dia. of bottle | mm | ≤80 |
| Hydraulic driving system | Motor power | KW | 17 |
| hydraulic pressure | Mpa | 14 |
| Pneumatic system | Min. Air pressure | Mpa | 1.0 |
| Discharge rate of compressed air | M3/mm | ≥0.8 |
| Cooling system | Water flowage | M3/h | 4 |
| Total rated power with mold heating | KW | 45 |
| Machine information | Dimension | M | 4×1.28×2.35 |
| machine weight | Ton | 7.5
|
Feature
* Excellent plasticizing unit
* Bridge clamping unit for synchronism mould open/close, cycle time
less
* Servo system can save 35 to 40% energy compared to normal system
* Servo rotary, precise, long using time, easy maintenance, save
energy.
* Optional injection with all-electric way, replacing hydraulic way * CE certificate
Configuration of Injection Blow Molding Machine
* Oil pump and hydraulic valve (Directional Valves, Power saving
valves, Pilot operated check modular valves, and Throttle check
modular valves): YUKEN brand Ex JAPAN.
* Pneumatic valve connector: FESTO Ex Germany.
* Oil seal: VALQUA brand Ex JAPAN.
* Controlling system: Act Technologies
* Electronic Rulers: Italy GEFRAN
* Molded case circuit breaker, contactor, Thermal overload relay: SCHEIDER brand Ex FRANCE.
